LEE'S SUMMIT, MO., April 25, 2013 -- Members of the Aircraft Electronics Association recently elected new representatives to its board of directors, and the AEA board of directors elected a new chairman and new vice chairman.
The new AEA chairman is Gary Harpster, a senior avionics sales representative for Duncan Aviation in Lincoln, Neb. A long-time AEA member who has served as vice chairman since 2010, Harpster was first elected to the AEA board of directors in 2005. After he got out of the U.S. Navy in 1976, Harpster acquired both his private and commercial pilot's licenses. He then went back to school at the University of Nebraska-Omaha and later transferred to Iowa Western, where he received a degree in electronics technology.
David Loso, manager of avionics sales for Jet Aviation St. Louis, was elected by the board to serve as its new vice chairman. Loso was first elected to the AEA board of directors in 2009, and he has been in business aviation for 34 years. Loso began his career with Bellanca Aircraft Company while attending Alexandria Technical College in Alexandria, Minn. After graduation, he moved to Wichita, Kan., taking a position with Cessna at the Citation Service Center as an avionics technician. In 1979, Loso accepted an avionics bench technician position with Rockwell Collins in Wichita, Kan. In 1981, he moved to Houston, Texas, to work for Garrett Aviation. During the next 18 years with Garrett, he served in several positions with the avionics department, including avionics shop supervisor.
Chuck Freeland, a regional sales representative for Otto Instrument Service in Ontario, Calif., was re-elected for his third three-year term. In addition, he has served as the secretary for the board since 2009, and will continue in that position after being re-elected by the board. Previously, Freeland was a regional sales manager for Sandel Avionics. He has been involved in the avionics industry for more than 30 years serving in various sales, marketing and flight department positions with Bendix/King throughout its transitions to AlliedSignal and Honeywell. He is an ATP-rated pilot with approximately 9,800 hours in various single- and twin-engine aircraft.
Tom Harper, the director of marketing for Avidyne Corp. in Lincoln, Mass., was elected to the board for the first time. Harper is responsible for corporate identity, branding and demand-generation initiatives at Avidyne. He joined the company in 1998, as a 20-year veteran of the avionics industry.
Garry Joyce, owner of IAE Ltd. in Cranfield, England, was re-elected for his second term to represent Europe. Joyce joined the Royal Air Force in 1989, originally as an airborne radar apprentice before moving into avionics. In 1997, Joyce left the RAF to pursue a career in civil aviation and joined IAE Ltd. as an avionics engineer. Once licensed, he became an inspector and, in 2001, became IAE's avionics manager. In 2006, Joyce purchased the company as part of a management buyout. He currently has several engineers carrying out maintenance, installation, repair (avionics and electrical) and owns EASA Part 145 and FAA repair station approvals.
Michael Kus, managing director of Avionics 2000 in Melbourne, Victoria, Australia, was re-elected for his third three-year term to represent the South Pacific region. Since its conception more than 20 years ago, Kus has expanded his business by growing it into one of the largest privately owned general aviation avionics equipment retailers and maintenance providers in Australia. Avionics 2000 was the first in Australia to fit and certify TCAS in a business aviation environment. It also was the first to obtain aircraft certification for primary means oceanic navigation using GPS. Kus' passion for aviation was launched in 1976, when he joined the Royal Australian Navy. He received avionics technician apprenticeship training with the RAN Fleet Air Arm and trained as an electrical fitter. While concurrently serving his country, Kus received honors from the Department of Technical and Further Education, NSW, for completion of its electronics and communications course in 1982.
Mike LaConto, the director of avionics sales and service for Epps Aviation in Atlanta, Ga., was re-elected for a second three-year term. He was first elected to the AEA board of directors in 2010. Upon joining Epps in 1998, he worked as an A&P and then moved into the avionics department in 1999. He obtained GROL certification with radar endorsement from the Federal Communications Commission. He furthered his training and education as an autopilot specialist by obtaining certificates in electronic and computer networking from Clayton State University. LaConto has received his NCATT certifications (Aviation Electronics Technician, Communication, NAV and FOE) and A&P with inspection authorization.
Rick Peavley, the president of Vero Beach Avionics Inc. in Vero Beach, Fla., was re-elected for his third three-year term. He has served on the AEA board of directors since 2007, and also serves on the AEA Government and Industry Affairs Committee. Peavley began his aviation career in 1969, courtesy of the U.S. Navy. He attended the University of Kansas studying electrical engineering and worked for King Radio Corp. as a test technician. Following a three-year stint in Anchorage, Alaska, with Air Logistics, he transferred to Petroleum Air Services, a joint venture with Air Logistics, in Cairo, Egypt.
Brian Wilson, the director of avionics for Banyan Air Services in Fort Lauderdale, Fla., was elected to the board for the first time. Wilson has worked in the aviation industry for more than 34 years. He began his career in the U.S. Navy where he served for seven years performing line troubleshooting on various aircraft; then transferred to the Depot level where he troubleshot the black boxes to component level. Following his service, Wilson moved to South Florida as a radar bench technician and line troubleshooter. Prior to joining Banyan six years ago, he served in supervisory or management positions at Bombardier, Raytheon and Jet Aviation.
Gary Harpster Begins New Role as Chairman