This course is designed for technicians who have completed AEA’s Basic Wiring & Avionics Installation Course and/or have a couple years of basic avionics installation practice and are looking for more experience integrating common general aviation installations. Technicians will learn how to plan, install, interface, configure and check out an installation consisting of a Garmin GTN 650 touch screen nav/com/GPS, Garmin GTX 345 transponder and an Aspen EFD1000 primary flight display.
Presented by: Don Dominguez of Radioman Avionics
FAA Accepted 8 Hours - Course # C-IND-IM-180105-K-010-001
Acceptance Letter
Course Goals:
Installation basics
- Review
- Installation tools and supplies
- Soldering skills
- Connector assembly
- Co-ax termination
- Review diagrams
- Make aircraft interface drawing specific to this aircraft
- Power-point showing schematic built-up
- Aspen Primary Flight Display Installation – EFD1000
- Garmin GPS/Nav/Com Installation – GTN650
- Garmin Transponder Installation - GTX 345
- System Configurations
- Test System
- Documentation
- Final check outs
Frank P.
5
Take the class!
Suzannah G.
5
This class was worth the time and money. I walked away with compressive understanding of avionics testing fundamentals.
Michael B.
4.8
Well worth attending.
Alex B.
4.6
Must attend for anyone working on GA aircraft.
Donald M.
5
GOOD class!
Jaime B.
5
You can learn and improve your avionics skills. You should really take it!
Mitchell J.
5
This is a worthwhile class for all avionics techs. Just take it!
Dalton V.
5
Go! Go! Go! Absolutely phenomenal!
Harold O.
5
Very knowledgeable teacher. Very good practice & great starting point.
Michael M.
5
Great class, learned alot, be prepared to become a professional avionics tester.
Lloyd G.
4
Its a very informative class especially for avionics techs who want to improve their craft
Gregg M.
5
Very nice training atmosphere, instructor very knowledgeable
Rawson H.
5
Good course to learn the techniques to further your wiring skills and produce the best product for your customers
Alberto A.
5
Definitely worth your time and money
Jorge I.
5
It's a good introductory course on the basics of installing/configuring components
Adrian H.
5
Highly recommend, register as soon as you can
R. C.
4.4
Worth the time and money
Chris H.
5
Well worth the cost
Joel K.
5
Great start on ADS-B harness building
Pedro M.
5
It is an excellent class and a very knowledgeable instructor
Ron B.
5
Worth the time and expense for the novice or experienced veteran as a brush up
Brandon C.
5
Very good class for the people just coming into avionics side of the aviation maintenance
Mohammad R.
5
Must attend. Recommend taking basic
James H.
4.8
Excellent introduction to practical installation troubleshooting.
Jeremy V.
5
It's a great class. Very informative.
Francis T.
5
This class is a must for all avionics enthusiasts
Corey R.
4.6
It is essential for anyone working with GA aircraft in the field of avionics.
Dwayne L.
4.2
Great opportunity to learn
Jessica P.
4.8
This is definitely worth it. The people are nice and they accept you and your abilities.
Conrad S.
4.8
Trust me, you don't want that. I'm horrible with words. But the class was good.
Thomas J.
5
Worth the time and effort
Craig H.
5
Great material and very expertly explained
Diego L.
4.8
It's a great training of installation and integration with all facilities
Samuel C.
4.8
It's and experience who no one must lose, testing all your knowledges, you must trying.
Sam B.
4.8
You will be ready to service the fleet by the end.
Steve G.
4.8
Review components online (installation manuals)
Jerry S.
5
Extremely well conducted class conducted by a world class instructor.
Justin C.
4.8
This was really a great way to get your hands on different manufacturer's equipment and see how they work together.
Jonathan Z.
4.8
Very helpful to bring an entry level tech up to speed with installs
Michael C.
5
Very good class and worth attending.
Max W.
5
Great!!!
Colton S.
5
The class is well worth the time and money
Andrew B.
5
Excellent hands-on experience, knowledge of instructor is is great, facility nice clean, tools you use in the field are used in class.
Robbie W.
5
Extremely helpful and beneficial for anyone with a lot of a little avionics experience.
Daniel S.
5
Definitely worth coming if you are doing avionics install
Ludwig Nicholas L.
5
Industry specific training that will advance the real world education of the aircraft electronics technician.
Cody W.
4.6
This is a brilliant class that I would recommend anyone installing avionics to take.
Zach H.
4.8
Great for the beginner with a few months' experience.
Brian Y.
4.8
Excellent background for installing/interfacing Aspen with Garmin gear. A little redundant if you've installed this gear before.
Bobby V.
4.8
Great, informative easy to digest classes.
Tony K.
5
Very good class on hands on training with today's equipment being installed.
Kyler G.
4.8
If you are looking for experience making wire bundles and configuring various avionics, I highly recommend this course.
George S.
4.4
Very good wiring practice & configuration practice. Helps with understanding of system integration.
Charles J.
5
Great class, well taught, great hands on equipment
Eric T.
5
Know what you want to derive from it and let experience add to knowledge.
Other Upcoming Courses
Advanced Avionics Installation & Configuration
Technicians will learn how to plan, install, interface, configure and check out an installation of a primary flight display, EHSI and GPS/Nav/Com consisting of dual Garmin GI 275, a Garmin GTN 650 touch screen, and a Garmin GTX 345 transponder. Designed for technicians who have experience with avionics installation practices and are looking for more training integrating common general aviation installations.
FAA Accepted 8 Hours - Course # C-IND-IM-240801-K-022-0006
SDR-OMNI Operations Training
Pitot-Static, Transponder, RVSM, and ADS-B: Testing & Inspection
Attendees will learn the proper methods for conducting pitot-static and transponder tests and inspections. This two-day course offers a regulatory review and an explanation of the proper administrative procedures for completing these critical certifications. Preparing and performing RVSM inspection tasks. ADS-B session covering installation, wiring and return to service review.
FAA Accepted 8 Hours - Course # C-IND-IM-170106-K-010-005
Certified Repair Station Training
This weeklong course provides an interactive environment to learn, understand and implement the regulations that govern repair station design and operations.
FAA Accepted 5 Hours - Course # C-IND-IM-180621-K-010-001
Basic Wiring & Avionics Installation
The Basic Wiring & Avionics Installation course is designed for certificated repairmen, new avionics technicians, aviation maintenance technicians and recent graduates interested in improving or acquiring the skills necessary to perform avionics installations. This three-day seminar employs in-depth theory and hands-on lab exercises to immerse the attendee in the best practices used to plan, manage, and install a general aviation avionics panel. Installation lab includes: Avidyne IFD540 FMS/GPS Navigator, Garmin G5 Electronic Flight Instrument & GAD 29 ARINC 429 data bus module, PS Engineering PMA8000BT Audio Panel and Trans-Cal SSD120-35C-RS-232 Altitude Encoder
FAA Accepted 8 Hours - Course # C-IND-IM-161028-K-010-002
AVX-10K & IFR6000/4000 Operations Training
This course is designed to provide maintenance personnel with the knowledge and skills required to operate and configure IFR6000 & IFR4000 to verify and maintain transponder, UAT, TCAS, DME, ILS, VOR, Comms and ELT. Plus a complete review all features and benefits of the AVX-10K Flight Line Test Set with emphasis on testing transponder (Mode S and ADS-B In/Out), UAT, TCAS and DME.
Basic Pitot-Static & Transponder Theory, Testing & Troubleshooting
The Basic Pitot-Static & Transponder course is designed for entry-level avionics technicians or those looking for basic training on pitot-static & aircraft transponder systems. This two-day course covers the history and theory of operation of pitot-static instruments and transponders, as well as system set-up, hands-on testing, and the troubleshooting skills necessary to perform FAR 91.411 and 91.413 checks.
FAA Accepted 8 Hours - Course # C-IND-IM-240718-K-022-0011
Avionics Installation for Experimental Aircraft
This course is targeted for the home builder or avionics technician who wants to learn about performing an avionics installation in an experimental aircraft. The class focuses on the Garmin G3X Touch system, and a simplified example harness is constructed as part of the hands-on portion of the class. While the G3X Touch system is the primary focus, the wiring principles and general guidance can be applied to any experimental avionics system. From the do-it-yourselfer to the avionics shop looking to carve out a niche, this class has something for everyone.
ADS-B Configuration, Testing & Troubleshooting
VIRTUAL-LIVE COURSE
This course is designed for currently employed repair station personnel and installers and maintainers of ADS-B systems. Approximately 4.8% of all general aviation ADS-B installations are non-compliant based on the FAA’s ADS-B Performance Monitoring System. This course focuses on the proper configuration and testing of ADS-B installations to ensure your installation meets the performance requirements and regulations. Also included are troubleshooting tips and tricks that will help you resolve the common problems found in ADS-B installations.